Male Run Tee

Flare Tube end to Male Pipe end SAE 070424
PART NUMBER INFORMATION:
  • FLMRT - Body only
  • FLAMRT - Assembled Fitting (Body, Sleeve & Nut)
At Seal Excel, you can find the best quality male run tee for your commercial or residential purposes. The part number information of 37 Flare Male Run Tee is mentioned below.

FLMRT – Body only
FLAMRT – Assembled fitting (body, sleeve, and nut)

The flared fittings of 37 Flare Male Run Tee offer better design and performance as compared to pipe fittings. In the case of flared fittings, the tubing is flared in preparation for the installation to secure the seal. Made from a sleeve and a nut, our 37 Flare Male Run Tee is fit to perform all the tasks and helps in building trust between the consumer and the seller. If there are low to medium pressure applications then it is best to go with flared fittings. Their use can be found extensively in military and aerospace equipment.

We offer the latest and the best quality products to our customers at an affordable rate and make sure that our customers are satisfied.
 
 
T
Tube OD
N-NPT Male Pipe B DIMENSIONS PART NO.
E F L1 L2
inch mm Size UNF inch mm inch inch mm inch mm Inches Metric
1/8 - 1/8 5/16 x 24 0.062 1.6 7/16 0.77 19.6 0.72 18.3 FLMRT-125-125N -
3/16 - 1/8 3/8 x 24 0.125 3.2 7/16 0.83 21.1 0.72 18.3 FLMRT-187-125N -
1/4 6 1/8 7/16 x 20 0.172 4.4 1/2 0.89 22.6 0.78 19.8 FLMRT-250-125N FLMRT-6-125N
1/4 6 1/4 7/16 x 20 0.172 4.4 9/16 1.06 26.9 1.09 27.7 FLMRT-250-250N FLMRT-6-250N
5/16 8 1/8 1/2 x 20 0.190 4.8 9/16 0.95 24.1 0.78 19.8 FLMRT-312-125N FLMRT-8-125N
5/16 8 1/4 1/2 x 20 0.234 6.0 9/16 1.06 26.9 1.09 27.7 FLMRT-312-250N FLMRT-8-250N
3/8 10 1/8 9/16 x 18 0.190 4.8 5/8 1.06 26.9 0.90 22.8 FLMRT-375-125N FLMRT-10-125N
3/8 10 1/4 9/16 x 18 0.280 7.1 5/8 1.06 26.9 1.09 27.7 FLMRT-375-250N FLMRT-10-250N
3/8 10 3/8 9/16 x 18 0.297 7.5 11/16 1.14 29.0 1.22 31.0 FLMRT-375-375N FLMRT-10-375N
3/8 10 1/2 9/16 x 18 0.297 7.5 7/8 1.23 31.2 1.47 37.3 FLMRT-375-500N FLMRT-10-500N
1/2 12 1/4 3/4 x 16 0.280 7.1 13/16 1.25 31.8 1.22 31.0 FLMRT-500-250N FLMRT-12-250N
1/2 12 3/8 3/4 x 16 0.380 9.5 13/16 1.25 31.8 1.22 31.0 FLMRT-500-375N FLMRT-12-375N
1/2 12 1/2 3/4 x 16 0.391 9.9 7/8 1.33 33.7 1.47 37.3 FLMRT-500-500N FLMRT-12-500N
1/2 12 3/4 3/4 x 16 0.391 9.9 1-1/8 1.42 36.0 1.59 40.4 FLMRT-500-750N FLMRT-12-750N
5/8 16 3/8 7/8 x 14 0.380 9.5 15/16 1.45 36.8 1.28 32.5 FLMRT-625-375N FLMRT-16-375N
5/8 16 1/2 7/8 x 14 0.470 11.9 15/16 1.45 36.8 1.47 37.3 FLMRT-625-500N FLMRT-16-500N
5/8 16 3/4 7/8 x 14 0.484 12.3 1-1/8 1.53 38.9 1.59 40.4 FLMRT-625-750N FLMRT-16-750N
3/4 18 1/2 1-1/16 x12 0.470 11.9 1-1/8 1.66 41.0 1.59 40.4 FLMRT-750-500N FLMRT-18-500N
3/4 18 3/4 1-1/16x12 0.609 15.5 1-1/8 1.66 41.0 1.59 40.4 FLMRT-750-750N FLMRT-18-750N
7/8 20 3/4 1-3/16x12 0.719 18.3 1-1/4 1.80 45.7 1.69 42.9 FLMRT-875-750N FLMRT-20-750N
1 25 3/4 1-5/16x12 0.719 18.3 1-3/8 1.81 46.0 1.78 45.2 FLMRT-1000-750N FLMRT-25-750N
1 25 1 1-5/16x12 0.844 21.5 1-3/8 1.81 46.0 1.97 50.0 FLMRT-1000-1000N FLMRT-25-1000N
Dimensions are for reference only and are subject to change