High Pressure Banjo Fittings - WHR

MALE STUD THREAD : BSP (Parallel with Metal Seal Ring DKA to DIN 3852/d4)

SERIES	TUBE O.D. T	MALE STUD THREAD BSP	DIMENSIONS ARE IN MILLIMETERS										RTT in NM	SEALEXCEL PART NO.	APPROX. WT KG PER 10 PCS
SERIES	TUBE O.D. T	MALE STUD THREAD BSP	B₁	D₃	H	L₁	L₂	L₃	L₄	S₂	S₃	S₆	RTT in NM	SEALEXCEL PART NO.	APPROX. WT KG PER 10 PCS
L-Light PN 315	6	1/8	8	14	2.5	27	12	24	10.5	14	17	17	20	WHR-6L-2GDKA	0.64
	8	1/4	12	18	3.0	29	14.5	30	14	17	22	19	50	WHR-8L-4GDKA	1.17
	10	1/4	12	18	3.0	30	15.5	30	14	19	22	19	50	WHR-10L-4GDKA	1.23
	12	3/8	12	22	3.0	33	18	36	16.5	22	27	24	75	WHR-12L-6GDKA	2.07
	15	1/2	14	26	4.5	37	21.5	45	21.5	27	32	30	130	WHR-15L-8GDKA	3.59
	18	1/2	14	26	4.5	37	21	45	21.5	32	32	30	130	WHR-18L-8GDKA	3.84
PN 160	22	3/4	16	32	3.5	44	27.5	53	24	36	41	36	250	WHR-22L-12GDKA	6.66
	28	1	18	39	3.5	49	32	66	30.5	41	50	46	350	WHR-28L-16GDKA	11.27
	35	1-1/4	20	49	3.5	58	36	76	35.5	50	60	55	600	WHR-35L-20GDKA	16.63
	42	1-1/2	22	55	3.5	63	40.5	87	40.5	60	70	60	800	WHR-42L-24GDKA	24.59
S-Heavy PN 400	6	1/4	12	18	3.0	31	16.5	30	14	17	22	19	50	WHR-6S-4GDKA	1.26
	8	1/4	12	18	3.0	31	16.5	30	14	19	22	19	50	WHR-8S-4GDKA	1.29
	10	3/8	12	22	3.0	35	18.5	36	16.5	22	27	24	75	WHR-10S-6GDKA	2.20
	12	3/8	12	22	3.0	35	18.5	36	16.5	24	27	24	75	WHR-12S-6GDKA	2.25
	14	1/2	14	26	4.5	40	22.5	45	21.5	27	32	30	130	WHR-14S-8GDKA	3.75
	16	1/2	14	26	4.5	40	22	45	21.5	30	32	30	130	WHR-16S-8GDKA	3.93
	20	3/4	16	32	3.5	48	26.5	53	24	36	41	36	250	WHR-20S-12GDKA	6.92
PN 250	25	1	18	39	3.5	56	31.5	66	30.5	46	50	46	350	WHR-25S-16GDKA	12.84
	30	1-1/4	20	49	3.5	64	37	76	35.5	50	60	55	600	WHR-30S-20GDKA	17.63
	38	1-1/2	22	55	3.5	72	41.5	87	40.5	60	70	60	800	WHR-38S-24GDKA	29.30

RTT- Recommended tightening torque for male stud BSP
O-Ring : Buna-N is standard
Viton^® are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : WHR-6L-2GDKA/ELV
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions, please contact us with complete details
Dimensions are for reference only and are subject to change.

Suffixes the following material code along with above part number while sending your enquiries / orders.
Material	Code	Example
SS316L	EL	WHR-6L-2GDKA/EL
SS304	I	WHR-6L-2GDKA/I
The material SS316Ti are available on request

High Pressure Banjo Fittings – WHR