0091-22-26788534
SEALEXCEL® Stainless Steel
Push-in-Fittings are resistance to
aggressive environments and
corrosive fluids etc., which are
generally used in Chemical, Food,
Printing, Packaging, marine
Pharmaceutical Industries etc.,
ADVANTAGES:

SURFACE TREATMENT:
•  Metric :  4mm to 16mm Tube OD
•  Fractional : 3/16” to 5/8” Tube OD.

DESIGN
SEALEXCEL® Stainless Steel
Push-in-Fittings consist of Six
precision components such as Body,
Releasing Sleeve, Washer, Gripping
Collet, Guide Ring and 'O' Ring.

PUSH-IN-FITTINGS
PDF CATALOG
GENERAL INFORMATION
SEALEXCEL Stainless Steel Push-in-Fittings are,
•  Easy for manual connection and
    disconnection.
• No tools required for connection
   and disconnection.
Each and every Stainless Steel components of SEALEXCEL Push-in-fittings are electropolished to ensure a corrosion resistant surface layer of chromium oxide  which is passive.
Pressure Rating - Up to 290 PSI.
Temperature Rating - Up to 150°C
PUSH-IN-FITTINGS

AVAILABLE SIZES
OPERATING PARAMETER

Stainless Steel Push on Fittings
Stainless Steel Push on Fittings
GENERAL INFORMATION
Stainless Steel Push on Fittings
PNEUMATIC
APPLICATIONS
Stainless Steel Push on Fittings
HYDRAULIC
APPLICATIONS
Stainless Steel Push on Fittings
INSTRUMENTATION APPLICATIONS
MATERIAL OF CONSTRUCTIONS
The Stainless Steel 316 raw material meets the following specifications.

SS-316 BAR STOCK  :  ASTM A-479
SS-316 FORGING   :  ASTM A-182
IDENTIFICATIONS
SEALEXCEL® Metric and Fractional size Stainless Steel Push-in-Fittings are similar in appearances.

INSTALLATION INSTRUCTIONS:
Ensure that the end of tube is cut square (90 ) and free   from burrs and sharp edges.
ODERING INFORMATION
The part Number describes complete assembly of SEALEXCEL Push-in Fittings.


37 Flare Tube FIttings

Tube FIttings as per DIN 2353

Precision Pipe Fittings

Quick Connect Couplings

Ball Valves

Swivel Joints

Ball Valves

SS Push in Fittings

SS Push on Fittings

Push on Fittings

Check Valves

Ball Valves

Flow Control Regulators

Ball Valves

Quick Exhaust Valves

Ball Valves

Quick Connect Couplings

Ball Valves

Tube Fittings

Manufacturer of Well-Lok Tube Fittings

Precision Pipe Fittings

Precision Pipe Fittings

Ball Valves

Ball Valves

Ball Valves (High Pressure)

Ball Valves

Three Way Ball Valves

Ball Valves

Needle Valves

Ball Valves

Rising Stem Plug Valves

Ball Valves

Gauge/Root Valves

Ball Valves

Purge Valves

Ball Valves

Bleed Valves

Ball Valves

Toggle Valves

Ball Valves

Check Valves

Ball Valves

Manifold Valves

Ball Valves

Monoflange Valves

Monoflange Valves

Integral Block Bleed Valves

INTEGRAL BLOCK & BLEED VALVES

Micron In-Line Filters

Ball Valves
Application :

Stainless Steel Push-in-Fittings


Stainless Steel Push-in-FittingsStainless Steel Push-in-Fittings
Stainless Steel Push-in-FittingsStainless Steel Push-in-Fittings
SEALEXCEL® Stainless Steel Push-in-Fittings are resistance to aggressive environments and corrosive fluids etc., which are generally used in Chemical, Food, Printing, Packaging, marine Pharmaceutical Industries etc., SEALEXCEL® Stainless Steel Push-in-Fittings are compatible with,
Stainless Steel Push-in-Fittings
•  Semi-rigid nylon tube
•  Flexible polyurethane tube
•  Low density polyethylene tube
•  Fluoropolymer FEP140 tube
•  Stainless Steel and copper tube (when grooved)
Design :
SEALEXCEL® Stainless Steel Push-in-Fittings consist of Six precision components such as Body, Releasing Sleeve, Washer, Gripping Collet, Guide Ring and 'O' Ring.
These components have been carefully designed and manufactured to very stringent tolerances under rigid quality control procedures approved to ISO 9001:2000 to provide a zero leak at all tubing connection in Instrumentation and process tubing.
Advantages :
SEALEXCEL® Stainless Steel Push-in-Fittings are,
•  Easy for manual connection and disconnection.
• No tools required for connection and disconnection.
• Full Flow without pressure drop.
•  Automatic tube sealing with 'O' Ring and   locking with gripping collet.
Each and every Stainless Steel components of SEALEXCEL Push-in-fittings are electropolished to ensure a corrosion resistant surface layer of chromium oxide  which is passive.
Surface Treatment :
Pressure            : upto 290 PSI (20 bar)
Temperature   : upto 150ºC
Operating Parameters :
Metric size ranges from         : 4mm through 16mm Tube OD
Fractional size ranges from  : 3/16” through 5/8” Tube OD.

Recommended tolerance on tube ±0.05 mm
Available Sizes :





Note : ‘O’ Ring EPDM are available on request
The Stainless Steel 316 raw material meets the
following specifications.
a)  SS-316 BAR STOCK  :  ASTM A-479
b)  SS-316 FORGING     :  ASTM A-182
Material of Constructions :

Stainless Steel Push-in-Fittings
SEALEXCEL® Metric and Fractional size Stainless Steel Push-in-Fittings are similar in appearances.
The significant difference is in the internal diameter of the Push-in-Fittings components, hence for easy identifications between metric and fractional sizes. SEALEXCEL provided 'V' Groove on Fractional sizes Push-in-Fittings as shown below.
Identifications :

Stainless Steel Push-in-Fittings
Stainless Steel Push-in-Fittings
 
 
 
 
 
 
 
Stainless Steel Push-in-FittingsStainless Steel Push-in-Fittings
Sealexcel India pvt.ltd.
High Performance Fittings & Valves
Call us
Email us
sales@sealexcel.com
Home
Corporate Info
Certifications
Products
Downloads
Enquiry
Contact Us
Infrastructure
Design, R & D

Manufacturing
Quality
Testing Facilities
Packaging
Our Goal
About Us
Profile

Mission
Vision
History
Social Commitment
Network
Corporate ID No. U29120MH1993PTC070627
D & B D-U-N-S® Number: 91-842-0055
Copyright © Sealexcel India Private Limited,
All Rights Reserved - 2016
Home
Corporate Info
Certifications
Products
Downloads
Enquiry
Contact Us
Infrastructure
Design, R & D

Manufacturing
Quality
Testing Facilities
Packaging
Our Goal
About Us
Profile

Mission
Vision
History
Social Commitment
Network
Corporate ID No. U29120MH1993PTC070627
D & B D-U-N-S® Number: 91-842-0055
Copyright © Sealexcel India Private Limited,
All Rights Reserved - 2017
Sealexce Mobile App
Stainless Steel Push on Fittings
Copyright © Sealexcel India Private Limited, All Rights Reserved - 2017
Stainless Steel Push on Fittings
Corporate ID No. U29120MH1993PTC070627
D & B D-U-N-S® Number: 91-842-0055
Stainless Steel Push on Fittings
Sealexce Mobile App
Send EnquirySend Enquiry