Male Run Tee
Flare Tube end to Male Pipe end SAE 070424PART NUMBER INFORMATION:
- FLMRT - Body only
- FLAMRT - Assembled Fitting (Body, Sleeve & Nut)
FLMRT – Body only
FLAMRT – Assembled fitting (body, sleeve, and nut)
The flared fittings of 37 Flare Male Run Tee offer better design and performance as compared to pipe fittings. In the case of flared fittings, the tubing is flared in preparation for the installation to secure the seal. Made from a sleeve and a nut, our 37 Flare Male Run Tee is fit to perform all the tasks and helps in building trust between the consumer and the seller. If there are low to medium pressure applications then it is best to go with flared fittings. Their use can be found extensively in military and aerospace equipment.
We offer the latest and the best quality products to our customers at an affordable rate and make sure that our customers are satisfied.
| T Tube OD |
N-NPT Male Pipe | B | DIMENSIONS | PART NO. | ||||||||
| E | F | L1 | L2 | |||||||||
| inch | mm | Size | UNF | inch | mm | inch | inch | mm | inch | mm | Inches | Metric |
| 1/8 | - | 1/8 | 5/16 x 24 | 0.062 | 1.6 | 7/16 | 0.77 | 19.6 | 0.72 | 18.3 | FLMRT-125-125N | - |
| 3/16 | - | 1/8 | 3/8 x 24 | 0.125 | 3.2 | 7/16 | 0.83 | 21.1 | 0.72 | 18.3 | FLMRT-187-125N | - |
| 1/4 | 6 | 1/8 | 7/16 x 20 | 0.172 | 4.4 | 1/2 | 0.89 | 22.6 | 0.78 | 19.8 | FLMRT-250-125N | FLMRT-6-125N |
| 1/4 | 6 | 1/4 | 7/16 x 20 | 0.172 | 4.4 | 9/16 | 1.06 | 26.9 | 1.09 | 27.7 | FLMRT-250-250N | FLMRT-6-250N |
| 5/16 | 8 | 1/8 | 1/2 x 20 | 0.190 | 4.8 | 9/16 | 0.95 | 24.1 | 0.78 | 19.8 | FLMRT-312-125N | FLMRT-8-125N |
| 5/16 | 8 | 1/4 | 1/2 x 20 | 0.234 | 6.0 | 9/16 | 1.06 | 26.9 | 1.09 | 27.7 | FLMRT-312-250N | FLMRT-8-250N |
| 3/8 | 10 | 1/8 | 9/16 x 18 | 0.190 | 4.8 | 5/8 | 1.06 | 26.9 | 0.90 | 22.8 | FLMRT-375-125N | FLMRT-10-125N |
| 3/8 | 10 | 1/4 | 9/16 x 18 | 0.280 | 7.1 | 5/8 | 1.06 | 26.9 | 1.09 | 27.7 | FLMRT-375-250N | FLMRT-10-250N |
| 3/8 | 10 | 3/8 | 9/16 x 18 | 0.297 | 7.5 | 11/16 | 1.14 | 29.0 | 1.22 | 31.0 | FLMRT-375-375N | FLMRT-10-375N |
| 3/8 | 10 | 1/2 | 9/16 x 18 | 0.297 | 7.5 | 7/8 | 1.23 | 31.2 | 1.47 | 37.3 | FLMRT-375-500N | FLMRT-10-500N |
| 1/2 | 12 | 1/4 | 3/4 x 16 | 0.280 | 7.1 | 13/16 | 1.25 | 31.8 | 1.22 | 31.0 | FLMRT-500-250N | FLMRT-12-250N |
| 1/2 | 12 | 3/8 | 3/4 x 16 | 0.380 | 9.5 | 13/16 | 1.25 | 31.8 | 1.22 | 31.0 | FLMRT-500-375N | FLMRT-12-375N |
| 1/2 | 12 | 1/2 | 3/4 x 16 | 0.391 | 9.9 | 7/8 | 1.33 | 33.7 | 1.47 | 37.3 | FLMRT-500-500N | FLMRT-12-500N |
| 1/2 | 12 | 3/4 | 3/4 x 16 | 0.391 | 9.9 | 1-1/8 | 1.42 | 36.0 | 1.59 | 40.4 | FLMRT-500-750N | FLMRT-12-750N |
| 5/8 | 16 | 3/8 | 7/8 x 14 | 0.380 | 9.5 | 15/16 | 1.45 | 36.8 | 1.28 | 32.5 | FLMRT-625-375N | FLMRT-16-375N |
| 5/8 | 16 | 1/2 | 7/8 x 14 | 0.470 | 11.9 | 15/16 | 1.45 | 36.8 | 1.47 | 37.3 | FLMRT-625-500N | FLMRT-16-500N |
| 5/8 | 16 | 3/4 | 7/8 x 14 | 0.484 | 12.3 | 1-1/8 | 1.53 | 38.9 | 1.59 | 40.4 | FLMRT-625-750N | FLMRT-16-750N |
| 3/4 | 18 | 1/2 | 1-1/16 x12 | 0.470 | 11.9 | 1-1/8 | 1.66 | 41.0 | 1.59 | 40.4 | FLMRT-750-500N | FLMRT-18-500N |
| 3/4 | 18 | 3/4 | 1-1/16x12 | 0.609 | 15.5 | 1-1/8 | 1.66 | 41.0 | 1.59 | 40.4 | FLMRT-750-750N | FLMRT-18-750N |
| 7/8 | 20 | 3/4 | 1-3/16x12 | 0.719 | 18.3 | 1-1/4 | 1.80 | 45.7 | 1.69 | 42.9 | FLMRT-875-750N | FLMRT-20-750N |
| 1 | 25 | 3/4 | 1-5/16x12 | 0.719 | 18.3 | 1-3/8 | 1.81 | 46.0 | 1.78 | 45.2 | FLMRT-1000-750N | FLMRT-25-750N |
| 1 | 25 | 1 | 1-5/16x12 | 0.844 | 21.5 | 1-3/8 | 1.81 | 46.0 | 1.97 | 50.0 | FLMRT-1000-1000N | FLMRT-25-1000N |