High Pressure Banjo Tee Fittings THR

MALE STUD THREAD : BSP (parallel with soft seal KD to DIN 3852/d4)

SERIES	TUBE O.D. T	MALE STUD THREAD BSP	DIMENSIONS ARE IN MILLIMETERS										RTT in NM	SEALEXCEL PART NO.	APPROX. WT KG PER 10 PCS
SERIES	TUBE O.D. T	MALE STUD THREAD BSP	B₁	D₄	H	L₁	L₂	L₃	L₄	S₂	S₃	S₆	RTT in NM	SEALEXCEL PART NO.	APPROX. WT KG PER 10 PCS
L-Light PN 315	6	1/8	8	17	2.5	27	12	24	10.5	14	17	17	20	THR-6L-2GKD	0.81
	8	1/4	12	22	3.0	29	14.5	30	14	17	22	19	50	THR-8L-4GKD	1.42
	10	1/4	12	22	3.0	30	15.5	30	14	19	22	19	50	THR-10L-4GKD	1.52
	12	3/8	12	27	3.0	33	18	36	16.5	22	27	24	75	THR-12L-6GKD	2.43
	15	1/2	14	32	4.5	37	21.5	45	21.5	27	32	30	130	THR-15L-8GKD	4.15
	18	1/2	14	32	4.5	37	21	45	21.5	32	32	30	130	THR-18L-8GKD	4.64
PN 160	22	3/4	16	41	3.5	44	27.5	53	24	36	41	36	250	THR-22L-12GKD	7.70
	28	1	18	46	3.5	49	32	66	30.5	41	50	46	350	THR-28L-16GKD	12.62
	35	1-1/4	20	57	3.5	58	36	76	35.5	50	60	55	600	THR-35L-20GKD	20.74
	42	1-1/2	22	64	3.5	63	40.5	87	40.5	60	70	60	800	THR-42L-24GKD	30.08
S-Heavy PN 400	6	1/4	12	22	3.0	31	16.5	30	14	17	22	19	50	THR-6S-4GKD	1.53
	8	1/4	12	22	3.0	31	16.5	30	14	19	22	19	50	THR-8S-4GKD	1.66
	10	3/8	12	27	3.0	35	18.5	36	16.5	22	27	24	75	THR-10S-6GKD	2.67
	12	3/8	12	27	3.0	35	18.5	36	16.5	24	27	24	75	THR-12S-6GKD	2.81
	14	1/2	14	32	4.5	40	22.5	45	21.5	27	32	30	130	THR-14S-8GKD	4.52
	16	1/2	14	32	4.5	40	22	45	21.5	30	32	30	130	THR-16S-8GKD	4.96
	20	3/4	16	41	3.5	48	26.5	53	24	36	41	36	250	THR-20S-12GKD	8.52
PN 250	25	1	18	46	3.5	56	31.5	66	30.5	46	50	46	350	THR-25S-16GKD	15.59
	30	1-1/4	20	57	3.5	64	37	76	35.5	50	60	55	600	THR-30S-20GKD	23.14
	38	1-1/2	22	64	3.5	72	41.5	87	40.5	60	70	60	800	THR-38S-24GKD	33.90

RTT = Recommended tightening torques for male stud BSP
/O-Ring : Buna-N is standard
Viton^® are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : THR-6L-2GKD/ELV
Soft Seal : PTFE
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions, please contact us with complete details
Dimensions are for reference only and are subject to change.

Suffixes the following material code along with above part number while sending your enquiries / orders.
Material	Code	Example
SS316L	EL	THR-6L-2GKD/EL
SS304	I	THR-6L-2GKD/I
The material SS316Ti are available on request

High Pressure Banjo Tee Fittings – THR