Support Sleeves - VH
| TUBE I.D | DIMENSIONS ARE IN MILLIMETERS | SEALEXCEL PART NO. | APPROX. WT KG PER 10 PCS | ||
| D1 | D2 | L1 | |||
| 4 | 3.8 | 2.6 | 14.0 | VH-4 | 0.01 |
| 4.5 | 4.3 | 3.1 | 14.0 | VH-4.5 | 0.01 |
| 5 | 4.8 | 3.6 | 14.0 | VH-5 | 0.01 |
| 6 | 5.8 | 4.6 | 14.0 | VH-6 | 0.01 |
| 6.5 | 6.3 | 5.1 | 14.0 | VH-6.5 | 0.01 |
| 7 | 6.8 | 5.6 | 15.5 | VH-7 | 0.02 |
| 8 | 7.8 | 6.6 | 15.5 | VH-8 | 0.02 |
| 9 | 8.8 | 7.6 | 15.5 | VH-9 | 0.02 |
| 10 | 9.8 | 8.6 | 15.5 | VH-10 | 0.02 |
| 10.5 | 10.3 | 9.1 | 15.5 | VH-10.5 | 0.02 |
| 11 | 10.8 | 9.6 | 15.5 | VH-11 | 0.03 |
| 12 | 11.8 | 10.2 | 17.0 | VH-12 | 0.04 |
| 13 | 12.8 | 11.2 | 17.0 | VH-13 | 0.03 |
| 14 | 13.8 | 12.2 | 17.0 | VH-14 | 0.05 |
| 15 | 14.8 | 13.2 | 20.0 | VH-15 | 0.05 |
| 16 | 15.8 | 14.2 | 20.0 | VH-16 | 0.06 |
| 17 | 16.8 | 15.2 | 20.0 | VH-17 | 0.07 |
| 18 | 17.8 | 16.2 | 20.0 | VH-18 | 0.07 |
| 19 | 18.8 | 17.2 | 16.0 | VH-19 | 0.06 |
| 20 | 19.8 | 18.2 | 21.5 | VH-20 | 0.10 |
| 21 | 20.8 | 19.2 | 21.5 | VH-21 | 0.10 |
| 22 | 21.8 | 20.2 | 23.5 | VH-22 | 0.12 |
| 23 | 22.8 | 21.2 | 23.5 | VH-23 | 0.13 |
| 24 | 23.8 | 22.2 | 23.5 | VH-24 | 0.12 |
| 25 | 24.8 | 23.2 | 23.5 | VH-25 | 0.09 |
| 26 | 25.8 | 24.2 | 23.5 | VH-26 | 0.13 |
| 27 | 26.8 | 25.2 | 23.5 | VH-27 | 0.14 |
| 30 | 29.8 | 27.8 | 26.5 | VH-30 | 0.17 |
| 31 | 30.8 | 28.8 | 26.5 | VH-31 | 0.18 |
| 32 | 31.8 | 29.8 | 26.5 | VH-32 | 0.17 |
| 33 | 32.8 | 30.8 | 26.5 | VH-33 | 0.20 |
| 34 | 33.8 | 31.8 | 26.5 | VH-34 | 0.26 |
| 38 | 37.8 | 35.8 | 21.0 | VH-38 | 0.23 |
| 39 | 38.8 | 36.8 | 21.0 | VH-39 | 0.23 |
- If you have requirements other than above size and Dimensions, please contact us with complete details
- Dimensions are for reference only and are subject to change.
| Suffixes the following material code along with above part number while sending your enquiries / orders. | ||
| Material | Code | Example |
| SS316L | EL | VH-4/EL |
| SS304 | I | VH-4/I |
| The material SS316Ti are available on request | ||