High Pressure Ball Valve Series : BV103

(For High Pressure Applications)

FEATURES

  • Available in SS316
  • Heat Code Traceable to certified material test report
  • Two piece body design, Bi-directional Flow
  • PTFE or PEEK Ball Seat, Bubble tight shut-off
  • Anti blow-out stem, Low torque operation
  • Floating ball design provides seat wear compensation
  • Quarter turn positive stop handle
  • Connector thread environmentally sealed
  • Variety of end configurations includes
  • Variety of end configurations includes SEALEXCEL® Well-Lok™ Tube Fittings, Male/Female NPT, BSPT pipe connection
  • 10 mm bore ball
  • Every valve is factory tested
High Pressure Ball Valve Series : BV103

OPERATING PARAMETERS

  • Pressure Rating :
    • upto 4000 psig (272 bar) at CWP with PTFE packing and seat
    • upto 6000 psig (408 bar) at CWP with PTFE packing and Peek seat
  • Temperature Rating :
    • -54OC to 204OC with PTFE packing and seat
    • -54OC to 232OC with PTFE packing and Peek seat

APPLICATION

  • Instrument Air Lines
  • General Plant Service
  • High Pressure Instrument Lines

MATERIAL OF CONSTRUCTIONS

  No.   Component   Material
1 Handle SS304
2 Handle Grip Polypropylene
3 Locking dome Nut SS316
4 Lock Nut SS316
5 Thrust Washer SS316
6 Stop Pin SS316
7 Thrust Washer SS316
8 Upper Gland Packing PTFE
9 Anti blow-out stem SS316
10 Gland Packing PTFE
11 Thrust Seal SS316
12 Ball Seats PTFE
13 Ball SS316
14 Sealing Washer SS316
15 Gasket PTFE
16 End Connector SS316
17 Body SS316
High Pressure Ball Valve Series : BV103

TECHNICAL DATA

The Temperature and Pressure rating for a standard valve with PTFE packing.

Temperature Pressure
psig bar
-540 C to 380 C 5000 340
-540 C to 930 C 4295 292
-540 C to 1480 C 3845 264
-540 C to 1760 C 3715 254
-540 C to 2040 C 3560 242
-540 C to 2320 C 3435 234
TESTING
  • Standard Test : Each Valve is factory tested with nitrogen at 1000 psig (69 bar) for leakage at the seat and packing, the maximum allowable leakage rate of 0.1 sccm
High Pressure Ball Valve Series : BV103
End Connections Dimensions mm (Inch.)   Ordering Number
Inlet Outlet   A                             B                         C-Hex                    D-Hex
6mm Well-Lok 6mm Well-Lok 95.0 (3.74)        165.5 (6.52)       31.75 (1.25)       41.0 (1.61) BV103-TT6M
8mm Well-Lok 8mm Well-Lok 96.6 (3.80)        166.3 (6.55)       31.75 (1.25)       41.0 (1.61) BV103-TT8M
10mm Well-Lok 10mm Well-Lok 99.5 (3.92)        167.6 (6.60)       31.75 (1.25)       41.0 (1.61) BV103-TT10M
12mm Well-Lok 12mm Well-Lok 104.7 (4.12)       170.2 (6.70)       31.75 (1.25)       41.0 (1.61) BV103-TT12M
1/4” Well-Lok 1/4” Well-Lok 95.0 (3.74)        165.5 (6.52)       31.75 (1.25)       41.0 (1.61) BV103-TT4
3/8” Well-Lok 3/8” Well-Lok 99.1 (3.90)        167.4 (6.59)       31.75 (1.25)       41.0 (1.61) BV103-TT6
1/2” Well-Lok 1/2” Well-Lok 104.7 (4.12)       170.2 (6.70)       31.75 (1.25)       41.0 (1.61) BV103-TT8
1/4” Male NPT 1/4” Female NPT 70.0 (2.76)        161.5 (6.36)       31.75 (1.25)       41.0 (1.61) BV103-MF4N
1/2” Male NPT 1/2” Female NPT 85.0 (3.35)        166.5 (6.56)       31.75 (1.25)       41.0 (1.61) BV103-MF8N
1/4" Female NPT 1/4" Female NPT 70.0 (2.76)        161.5 (6.36)       31.75 (1.25)       41.0 (1.61) BV103-FF4N
3/8” Female NPT 3/8” Female NPT 71.0 (2.83)        162.0 (63.8)       31.75 (1.25)       41.0 (1.61) BV103-FF6N
1/2” Female NPT 1/2” Female NPT 85.0 (3.35)        166.5 (6.56)       31.75 (1.25)       41.0 (1.61) BV103-FF8N

Dimensions shown with SEALEXCEL® Well-Lok™ Nut are finger tight

Dimensions are for reference only and are subject to change.

General Information Ordering Information Enquiry Catalogue