Needle Valves : Series - BS03


FEATURES

  • Available in material SS316, Inconel, Monel, Duplex etc. all wetted parts in accordance with NACE MR01-75
  • Heat Code Traceable to certified material test report
  • Low operating torques
  • Bar stock Body in Straight Pattern
  • Anti Blow-out stem, Variety of stem tips
  • PTFE packing standard
  • Flow coefficient (Cv) From 0.35 to 1.8
  • Orifice size : 0.156" (4.0 mm), 0.250" (6.4mm), 0.375" (9.5mm)
  • Variety of end configuration includes SEALEXCEL® Well-Lok™ Tube Fittings, Male / Female NPT, BSPT, BSPP pipe and tube socket weld connections
  • Every valve is factory tested.


OPERATING PARAMETERS

  • Pressure Rating : upto 6000 psig (413 bar) at CWP
  • Temperature Rating :
    • -54ºC to 232ºC with standard PTFE packing
    • upto 426ºC with optional Graphite packing

APPLICATION

  • General Plant Service
  • Instrument Isolation
  • Hydraulic and Pneumatic
  • Pressure measurement devices
  • Venting

STEM TYPE

SEALEXCEL Needle Valves are available with a choice of the optional stem to provide greater flexibility.

  • NON-ROTATING (NR): It is Standard self-centring non-rotating stem tip typically used in high cycle application to extend the valve life.
  • V-STEM (VS): It is used for general purpose liquid and gases.
  • SOFT SEAT (SS): A soft seat stem requires a lower sealing torque, It is replaceable and suitable for temperature upto 120ºC
  • REGULATING STEM (RS) : It is used where some degree of flow control required.

  • MATERIAL OF CONSTRUCTIONS

      Sr. No.   Part Description   Material
    1. Bar Handle SS316
    2. Set Screw SS316
    3. Stem SS316
    4. Stem Tip SS316
    5. Packing Adjuster SS316
    6. Lower Bonnet SS316
    7. Bonnet Lock Nut SS316
    8. Packing PTFE/Graphite
    9. Packing Washer SS316
    10. Washer SS316
    11. Bonnet Lock Pin SS316
    12. Dust Cap PVC
    13. Valve Body SS316

    TECHNICAL DATA

    The Temperature and Pressure rating for a standard valve with PTFE packing.

      Temperature Pressure
    psig bar
    -54ºC to 38ºC 6000 408
    -54ºC to 93ºC 5160 351
    -54ºC to 148ºC 4660 317
    -54ºC to 204ºC 4280 291
    -54ºC to 232ºC 4130 289
    TESTING
    • Standard Test: Each Valve is factory tested with nitrogen at 1000 psig (69 bar) for leakage at the seat and packing
    • Optional Hydrostatic test : This test is performed with de-ionised water at 1.5 time the working pressure.

    STANDARD CONFIGURATION DIMENSIONS

    End Connections     Orifice     Cv Dimensions (mm)   Ordering Number
      Inlet   Outlet   A   B   E   F   H   J
    1/4" Well-Lok 1/4" Well-Lok 4.3 0.37 73.0 36.5 12.7 52.5 73.0 - BS03-TT4
    3/8" Well-Lok 3/8" Well-Lok 6.4 0.86 73.0 36.5 14.3 57.0 88.0 - BS03-TT6
    1/2" Well-Lok 1/2" Well-Lok 6.4 0.86 77.8 38.9 14.3 57.0 88.0 - BS03-TT8
    3/4" Well-Lok 3/4" Well-Lok 6.4 0.86 85.2 42.6 15.9 63.5 114.0 - BS03-TT12
    6mm Well-Lok 6mm Well-Lok 4.3 0.37 73.0 36.5 12.7 52.5 73.0 - BS03-TT6M
    8mm Well-Lok 8mm Well-Lok 4.3 0.37 73.0 36.5 12.7 52.5 73.0 - BS03-TT8M
    10mm Well-Lok 10mm Well-Lok 6.4 0.86 73.0 36.5 14.3 57.0 88.0 - BS03-TT10M
    12mm Well-Lok 12mm Well-Lok 6.4 0.86 77.8 38.9 14.3 57.0 88.0 - BS03-TT12M
    1/8" Female NPT 1/8" Female NPT 4.3 0.37 57.2 28.6 12.7 47.6 73.0 - BS03-FF2N
    1/4" Female NPT 1/4" Female NPT 4.3 0.37 57.2 28.6 12.7 52.5 73.0 - BS03-FF4N
    3/8" Female NPT 3/8" Female NPT 6.4 0.86 57.2 28.6 14.3 57.0 88.0 - BS03-FF6N
    1/2" Female NPT 1/2" Female NPT 6.4 0.86 66.6 33.3 15.9 63.5 113.0 - BS03-FF8N
    3/4" Female NPT 3/4" Female NPT 9.5 1.80 69.8 34.9 17.5 63.5 115.0 - BS03-FF12N
    1" Female NPT 1" Female NPT 9.5 1.80 82.6 41.3 22.5 69.9 122.0 - BS03-FF16N
    1/4" Male NPT 1/4" Male NPT 4.3 0.37 57.2 28.6 12.7 52.5 73.0 - BS03-MM4N
    1/4" Male NPT 1/4" Female NPT 4.3 0.37 60.2 30.1 12.7 52.5 73.0 - BS03-MF4N
    1/2"Male NPT 1/2" Female NPT 6.4 0.86 69.8 34.9 15.9 63.5 113.0 - BS03-MF8N
    3/4" Male NPT 3/4" Female NPT 9.5 1.80 76.2 38.1 17.5 63.5 115.0 - BS03-MF12N
    1" Male NPT 1" Female NPT 9.5 1.80 85.8 42.9 22.5 69.9 122.0 - BS03-MF16N
    1/4 " TSW 1/4 " TSW 4.3 0.37 57.2 28.6 12.7 52.5 73.0 7.2 BS03-TSW4
    3/8" TSW 3/8" TSW 6.4 0.86 57.2 28.6 14.3 52.5 88.0 8.0 BS03-TSW6
    1/2" TSW 1/2" TSW 6.4 0.86 66.6 33.3 14.3 52.5 88.0 9.6- BS03-TSW8
    3/4" TSW 3/4" TSW 9.5 1.80 69.8 34.9 15.9 63.5 113.0 11.1 BS03-TSW12

    Dimensions shown with SEALEXCEL® Well-Lok™ Nut are finger tight

    Dimensions are for reference only and are subject to change.