Stainless Steel Push-on-Fittings
Installation Instructions
| 1) |
For Tube: PA6 PA11 PA12 Polyethylene Polyurethane PTFE |
| Ensure that the end of tube is cut square (90°) and free from burs and sharp edges |
| 2) |
Insert the Nut on the Tube |
| 3) |
Insert the tube by hand on the fitting nozzle and make sure that the tube rest on the nozzle base firmly |
| 4) |
Tighten the Nut by hand or if necessary by a spanner |