High Pressure Banjo Fittings - WHM

MALE STUD THREAD : metric (parallel with soft seal KD to DIN 3852/d4)

SERIES	TUBE O.D. T	MALE STUD THREAD METRIC	DIMENSIONS ARE IN MILLIMETERS										RTT in NM	SEALEXCEL PART NO.	APPROX. WT KG PER 10 PCS
SERIES	TUBE O.D. T	MALE STUD THREAD METRIC	B₁	D₄	H	L₁	L₂	L₃	L₄	S₂	S₃	S₆	RTT in NM	SEALEXCEL PART NO.	APPROX. WT KG PER 10 PCS
L-Light PN 315	6	M10x1	8	17	2.5	27	12.0	24	10.5	14	17	17	20	WHM-6L-10MKD	0.66
	8	M12x1.5	12	22	3.0	29	14.5	30	14.0	17	22	19	50	WHM-8L-12MKD	1.16
	10	M14x1.5	12	22	3.0	30	15.5	30	14.0	19	22	19	50	WHM-10L-14MKD	1.27
	12	M16x1.5	12	27	3.0	33	18.0	36	16.5	22	27	24	75	WHM-12L-16MKD	2.07
	15	M18x1.5	14	32	4.5	37	21.5	45	21.5	27	32	30	130	WHM-15L-18MKD	2.88
	18	M22x1.5	14	32	4.5	37	21.0	45	21.5	32	32	30	130	WHM-18L-22MKD	3.93
PN 160	22	M26x1.5	16	41	3.5	44	27.5	53	24.0	36	41	36	250	WHM-22L-26MKD	6.70
	28	M33x2	18	46	3.5	49	32.0	66	30.5	41	50	46	350	WHM-28L-33MKD	11.11
	35	M42x2	20	57	3.5	58	36.0	76	35.5	50	60	55	600	WHM-35L-42MKD	16.77
	42	M48x2	22	64	3.5	63	40.5	87	40.5	60	70	60	800	WHM-42L-48MKD	25.17
S-Heavy PN 400	6	M12x1.5	12	22	3.0	31	16.5	30	14.0	17	22	19	50	WHM-6S-12MKD	1.25
	8	M14x1.5	12	22	3.0	31	16.5	30	14.0	19	22	19	50	WHM-8S-14MKD	1.33
	10	M16x1.5	12	27	3.0	35	18.5	36	16.5	22	27	24	75	WHM-10S-16MKD	2.20
	12	M18x1.5	12	27	3.0	35	18.5	36	16.5	24	27	24	75	WHM-12S-18MKD	2.83
	14	M20x1.5	14	32	4.5	40	22.5	45	21.5	27	32	30	130	WHM-14S-20MKD	3.78
	16	M22x1.5	14	32	4.5	40	22.0	45	21.5	30	32	30	130	WHM-16S-22MKD	3.98
	20	M27x2	16	41	3.5	48	26.5	53	24.0	36	41	36	250	WHM-20S-27MKD	6.99
PN 250	25	M33x2	18	46	3.5	56	31.5	66	30.5	46	50	46	350	WHM-25S-33MKD	12.68
	30	M42x2	20	57	3.5	64	37.0	76	35.5	50	60	55	600	WHM-30S-42MKD	17.76
	38	M48x2	22	64	3.5	72	41.5	87	40.5	60	70	60	800	WHM-38S-48MKD	29.87

RTT- Recommended tightening torque for male stud BSP
ED Seal/O-Ring : Buna-N is standard
Viton^® are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : WHM-6L-10MKD/ELV
Soft Seal : PTFE
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions, please contact us with complete details
Dimensions are for reference only and are subject to change.

Suffixes the following material code along with above part number while sending your enquiries / orders.
Material	Code	Example
SS316L	EL	WHM-6L-10MKD/EL
SS304	I	WHM-6L-10MKD/I
The material SS316Ti are available on request

High Pressure Banjo Fittings – WHM