Male RUn Tee
SEALEXCEL® Fine-Lok™/ Well-Lok™ Tube fittings have been carefully designed and manufactured with continuous research and development backing to very stringent tolerances under rigid Quality Control procedures approved to ISO 9001-2000 quality management systems to provide zero leak, Torque free seal in instrumentation and process tubing.

MATERIAL

Tube fittings are available as standard stainless steel 316. The raw materials used confirm to chemical requirements listed in specification below...

HEAT TRACEABILITY

Stainless steel 316 Tube fittings are heat code traceable back to the original mill heat from which it was made.

PRESSURE RATING

Tube fitting are rated for working pressure higher than the tubing recommended in tubing data table..

TUBING SELECTION

Stainless steel 304 and 316 fully annealed seamless tubing according to standard ASTM A213 or ASTM A269

GAS SERVICE

Extra care must be taken while selecting tubing for gas application, In order to achieve a gas-tight seal, ferrules in instruments fittings must seal any minor surface imperfections.

PIPE END NPT AND ISO
PRESSURE RATINGS

Fitting that has both tube and pipe thread ends can have different pressure ratings. The pipe end pressure ratings chart ...

Tube Fittings consist of four precision component such as Nut, Back Ferrule, Front Ferrule and Body.

CONSTRUCTION OF
FINE-LOK TUBE FITTINGS

Tube Fittings consist of three precision component such as Nut, Single Ferrule and Body.

INSTALLATION INSTRUCTION

Ensure that, the end of the tube is cut square and free from burrs without causing  undue chamfering of the tube end.

PIPE THREAD INFORMATION

Pipe fittings are available with NPT/BSP/ISO and SAE/MS straight thread.

ORDERING INFORMATION

The part Number describes completely assembled Fine-Lok / Well-Lok  Tube fittings.

CONSTRUCTION OF
WELL-LOK TUBE FITTINGS
TUBE FITTING pdf catalog
TUBE FITTING
PDF CATALOG
Download TUBE FITTING pdf catalogDownload TUBE FITTING pdf catalog
GENERAL INFORMATION
Tube Fittings Male Connector ISO Tapered Thread
Stainless Steel 316 Compression Tube Fittings
Stainless Steel 316 Compression Tube Fittings

Tube Fittings

Manufacturer of Well-Lok Tube Fittings

Precision Pipe Fittings

Precision Pipe Fittings

Ball Valves

Ball Valves

Ball Valves (High Pressure)

Ball Valves

Three Way Ball Valves

Ball Valves

Needle Valves

Ball Valves

Rising Stem Plug Valves

Ball Valves

Gauge/Root Valves

Ball Valves

Purge Valves

Ball Valves

Bleed Valves

Ball Valves

Toggle Valves

Ball Valves

Check Valves

Ball Valves

Manifold Valves

Ball Valves

Monoflange Valves

Monoflange Valves

Integral Block Bleed Valves

INTEGRAL BLOCK & BLEED VALVES

Micron In-Line Filters

Ball Valves
FEATURES & BENEFITS
Tube Fittings in SS316 are traceable
to certified material test report.

MATERIAL TRACEABILITY


Extend the fittings life by preventing
galling across a wide range of
temperature.

SILVER PLATED NUT


The leading edge of back ferrules
are case hardened.
Ensure strong Tube grip.

BACK FERRULES


Precision Machined to very close
tolerances by monitoring critical
dimensions, surface finish, run out
and sharp edges.

FRONT FERRULES


SEALEXCEL® manufacture each
and everycomponents of Tube
Fittings to very close tolerances

GAUGEABILITY


Manufactured to maximum tolerances.

PIPE THREADS


The Design of SEALEXCEL®
Well-Lok™ Twin Ferrule Tube Fittings
are similar to certain other
well-known Fittings manufacturers

INTER-CHANGEABILITY

37 Flare Tube FIttings

Tube FIttings as per DIN 2353

Precision Pipe Fittings

Quick Connect Couplings

Ball Valves

Swivel Joints

Ball Valves
HYDRAULIC
APPLICATIONS
PNEUMATIC
APPLICATIONS

SS Push in Fittings

SS Push on Fittings

Precision Pipe Fittings

Check Valves

Ball Valves

Flow Control Regulators

Ball Valves

Quick Exhaust Valves

Ball Valves

Quick Connect Couplings

Ball Valves
INSTRUMENTATION APPLICATIONS
A slight taper in the base of the tube
socket in the Fitting body.

SIZING ANGLE


Male Branch Tree

Male Branch Tree

(Tapered Thread)

Positionable Male Elbow

(ISO Parallel Thread)
Positionable Male Elbow (ISO Parallel Thread)
(SAE/MS Straight Thread)

Positionable Male Elbow

Positionable Male Elbow (SAE/MS Straight Thread)
Male Elbow (ISO Tapered Thread)

Male Elbow

(ISO Tapered Thread)
Male Elbow (Tapered Thread)

Male Elbow

(Tapered Thread)
(Tapered Thread)

Bulkhead Male Connector

Bulkhead Male Connector
Thermocouple Male Connector
(TaperedThread)

Thermocouple Male
Connector

Male Connector

(ISO Parallel Thread - RS)
Male Connector (ISO Parallel Thread - RS)
(ISO Parallel Thread-RP)

Male Connector

Male Connector (ISO Parallel Thread-RP)
Male Connecor (EO-Seal ISO Parallel Thread)
(EO-Seal ISO Parallel Thread)

Male Connector

Male Connector (EO-Seal Straight Thread)

Male Connector

(EO-Seal Straight Thread)
Long Male Connector

Long Male Connector

(SAE/MS Straight Thread)
Male Connector (SAE/MS Straight Thread)

Male Connector

(SAE/MS Straight Thread)

Male Connector

(ISO Tapered Thread)
Tube Fittings Male Connector

Male Connector

(Tapered Thread)

Male Run Tee

(Tapered Thread)
Positionable Male Branch Tee

Positionable Male Branch Tee

(SAE/MS Straight Thread)
(ISO Parallel Thread)

Positionable Male Branch Tee

Positionable Male Branch Tee (ISO Parallel Thread)

Positionable Male Run Tee

(SAE/MS Straight Thread)
Positionable Male Run Tee
Positionable Male Run Tee (ISO Parallel Thread)

Positionable Male Run Tee

(ISO Parallel Thread)
(Tapered Thread)

Female Connector

Female Connector

Female Connector

(ISO Tapered Thread)
Female Connector
Female Connector
Female Connector
(ISO Parallel Thread)
Tube FittingsTube Fittings
Contd.... Page 2

World class Tube Fittings manufacturer

Key Features of Our Stainless Steel Tubing Fittings

Committed to offer nothing but the best quality in industrial pipes and fittings, we offer our customers a comprehensive portfolio of compression tube fittings which ensure high end precision and system safety. We have been serving the industry as stainless steel fittings manufacturers for decades, and have a clientele which trusts us to deliver nothing but the very best in quality. We are an ISO 9001:2008 certified company, which adheres to the most stringent quality assurance methods in the industry. This is why our tube fittings, are safe, durable with precision quality features.
We are metallic tube fittings suppliers, who offer a wide range of fitting options to cater to the varied needs of clients. We offer twin ferrule compression fittings and are compression tube fittings manufacturers who offer high quality product design with the following features,

All our well lock tube fittings have been designed with four key precision components that include the front ferrule, the nut, back ferrule and the body of the tube fitting.

The tube fittings are designed with a stainless steel 316 material and all raw materials conform to industry and chemical specification requirements.

All tube fitting units have a heat code traceable feature, which is highly effective in tracking back the unit to certified material test report.

It is essential to exercise extra care when choosing tube fittings for gas application systems. It is essential that the ferrules in the instrument fittings seal up any surface imperfections to ensure safety.
The tube fittings are manufactured with a silver plated nut which extends the life of the fitting, and prevents any risk of galling, which may occur due to fluctuations across a range of temperatures.

The tube fittings have case hardened back ferrules. These ensure a strong tube grip.

Front ferrules of the tube fittings have been designed with precision, and have very low tolerance rates, through the monitoring of surface finish, critical dimensions, and sharp edges.

The stainless tube fittings have a sizing angle which details a slight taper in the actual baseline of the socket of the tube within the fitting body.

The pipe threads are manufactured to withstand maximum tolerances.

Tube fittings come with installation instructions which include making sure that the tube end is cut squarely, and is free from any burs. It is to be duly noted that there is no chamfering at the end of the tube.

The compression tube fittings are available with NPT/BSP/ISO as well as SAE/MS straight thread features.

Click here to access details for ordering information for Compression Tube Fittings Stainless..

Portfolio of Compression Tube Fittings in Stainless Steel

We offer a wide selection of stainless steel tube fittings and Twin Ferrule Compression Fittings to match all types and varieties of industrial needs.

All our units are tested for helium leak detection tests, along with a hydraulic burst pressure test, which makes our products highly durable and safe in different high pressure and vacuum applications.

Click here to download the Sealexcel tube fitting product catalogue.
0091-22-26788534
Sealexcel India pvt.ltd.
High Performance Fittings & Valves
Call us
Email us
sales@sealexcel.com
Home
Corporate Info
Certifications
Products
Downloads
Enquiry
Contact Us
Infrastructure
Design, R & D

Manufacturing
Quality
Testing Facilities
Packaging
Our Goal
About Us
Profile

Mission
Vision
History
Social Commitment
Network
Corporate ID No. U29120MH1993PTC070627
D & B D-U-N-S® Number: 91-842-0055
Copyright © Sealexcel India Private Limited,
All Rights Reserved - 2017
Sealexce Mobile App
Sealexcel India pvt.ltd.
Fittings and Valves
Copyright © Sealexcel India Private Limited, All Rights Reserved - 2017
Valves and Fittings
Corporate ID No. U29120MH1993PTC070627
D & B D-U-N-S® Number: 91-842-0055
Fittings and Valves
Sealexce Mobile App
Send EnquirySend Enquiry