Precision pipe fittings and adapters are designed and manufactured to very stringent tolerances under rigid quality control procedures approved to ISO 9001:2000 to provide leak free connections for chemical etc.
1/8" to 1" pipe thread
Pressure Rating: upto 10000 PSIG (Depending on size)
Temperature Rating: upto 426°C
PIPE THREAD INFORMATION:
Pipe fittings are available with NPT (National Pipe Taper), BSP/ISO and SAE/MS Straight Thread..
SEALEXCEL® precision Instrument pipe fittings and adapters are designed and manufactured to very stringent tolerances under rigid quality control procedures approved to ISO 9001:2000 to provide leak free connections for chemical, petrochemical, processing plants, oil, gas and power generation industries, etc.
SEALEXCEL® precision pipe fittings and Adapters are available as standard stainless steel 316. The raw materials used confirm to chemical requirements listed in specification below.
Heat Code Traceability
SEALEXCEL® Stainless steel 316 precision pipe fittings are heat code traceable back to the original mill heat from which it was made.
• Sizes ranges from 1/8" through 1". • Pipe threads are available with, a) NPT (National Pipe Taper) and exceed the requirement of ANSI B1.20.1. b) BSP/ISO (British Standard Pipe/International Standard Organisation). c) SAE/MS straight thread. All exposed threads protected with plastic caps to prevent damage and packed in sealed, clear plastic bag for cleanliness.
• Working pressures calculated in accordance with power piping code ANSI B31.1 and refiner piping code ANSI B31.3. • Straight fittings machined from Bar Stock. • Elbows, Tees and Crosses machined from close grain forgings.
The part number describes the SEALEXCEL®precision pipe fittings.
Example : For NPT (National Pipe Thread) fittings, Part no : RHN-8N-4N/E
Type of Fittings
1st End pipe thread size & type
2nd End pipe thread size & type
Reducing Hex Nipple
Example : For ISO Conversion fittings, Part no : NH-4N-4RT/E